For optimal results, follow a complete system: surface preparation, application of putty (powder putty and ready wall putty), base coat (interior or interior & exterior emulsion), and finally the top coat (semi-gloss or silk emulsion).
Powder Putty is used for initial leveling of the surface and requires mixing before application.
Ready Wall Putty comes pre-mixed and is used for final smoothing and filling minor cracks.
Yes, Ready Wall Putty is suitable for filling minor cracks, dents, and surface imperfections before painting.
Semi-Gloss Emulsion provides a higher sheen and is more durable and washable.
Silk Emulsion offers a lower sheen with a smoother and more elegant finish.
Interior Emulsion is ideal for indoor surfaces.
Interior & Exterior Emulsion can be used both inside and outside, offering better durability against weather conditions.
Typically:
2 coats of Powder Putty
1 coat of Ready Wall Putty
1 base coat of emulsion
2 coats of final finish (Semi-Gloss or Silk Emulsion)
Putty: 4–6 hours
Emulsions: Touch dry in 30–60 minutes, recoat after 4–6 hours
Drying time may vary depending on temperature and humidity.
Powder Putty: 1–2 m²/kg per coat
Ready Wall Putty: 2–3 m²/kg per coat
Interior Emulsion: 5–6 m²/kg per coat
Interior & Exterior Emulsion: 5–6 m²/kg per coat
Semi-Gloss Emulsion: 7–9 m²/kg per coat
Silk Emulsion: 7–9 m²/kg per coat
Yes, customers can select their desired color shade, which is applied as the final coat to achieve the preferred look.
Semi-Gloss Emulsion is recommended for high-traffic areas due to its higher durability and washability.
Saudia Paints can be applied using a brush, roller, or spray, depending on the surface and project requirements.
Proper surface preparation
Correct application of putty
Following recommended drying times
Applying the correct number of coats
Yes, good ventilation is essential during application and drying to ensure proper curing and safety.
Yes, the Interior & Exterior Emulsion is specifically designed for both indoor and outdoor use.
It is recommended to allow at least 24 hours for the final coat to dry and cure properly.
In most cases, the base coat of Interior Emulsion or Interior & Exterior Emulsion acts as a sealer. However, for highly porous or new surfaces, proper surface preparation with putty is essential.
Skipping putty may result in an uneven surface, poor paint adhesion, and a less durable finish. Putty ensures smoothness and improves the final appearance.
No, the surface must be completely dry before painting. Moisture can cause peeling, blistering, and poor adhesion.
Mix the powder putty with clean water as per recommended consistency until a smooth paste is formed. Allow it to settle briefly before use.
Choose shades based on lighting, room size, and design preference. Lighter shades make spaces look larger, while darker tones create a more dramatic effect.
Clean gently with a soft cloth or sponge
Avoid harsh chemicals
Use Semi-Gloss Emulsion in areas requiring frequent cleaning
Roller: Best for smooth and even finish on large areas
Brush: Suitable for corners and edges
Spray: Ideal for professional and uniform application
Yes, but ensure the old surface is clean, stable, and lightly sanded. Remove any loose or flaking paint before applying new coats.
Temperature between 10°C to 35°C
Low humidity
Avoid painting during rain or extreme heat
With proper application and maintenance, Saudia Paints systems provide a long-lasting finish that can remain in good condition for several years.
